Best Quietest Sump Pumps – Reviews & Buying Guide (2019)

You don’t need to have traveled the entire world to know the kind of weather that exists in different parts of the world.

Unpleasant weather conditions like extreme heat, extreme cold, extreme rain exist all around the world and the challenges that come with these weather changes, they cause a different set of problems altogether.

The most unmanageable of these is the extreme rainfall, especially when it has the ability to cause a small flood in the house due to the poor drainage system.

And on the top of these problems, a flooded and soaked basement is the beginning of your problems, because damaged flooring is worse than a flooded basement.

Let the water stay for a bit long and the next thing that will be affected is your furniture. Poor drainage system, damaged water discharge system and blockage of water will convert your house into a mini island.

Enough about the problems that a poor drainage system can cause, let’s see the possible solutions to the problem.

The easiest way is to simply dig a sump pit in the basement and install a pump that will discharge the water at a safer distance from your place.

These pumps are commonly called Sump Pumps and they can prove to be quite helpful if you don’t want to spend an entire weekend mopping the floor of your basement of all places.

In this article today we will be looking at some of the best sump pump solutions while making sure that they are the quietest ones in the market.

And to help make this process of buying a sump pump easier, I will add a buying guide in this article. So, first, let’s have a look at the buying guide.


What to consider while buying a sump pump?

Without any professional help, buying a sump pump, all alone, can be a very strenuous task. You should know what features to look for when you are buying a new pump.

This buying guide will help you do exactly that, investigate factors that should be on the top of your mind when buying a sump pump.

1. Consider the overall making of the product

The first thing that you should read lots and lots about is the overall making of the product. You should be very particular about the housing of the product that you are buying.

Good housing means a sturdy and durable product and a good material will protect your machine from decay and rust.

If the material is sturdy then you are guaranteed that you are protected from accidental damages.

Some of the sump pumps available are made of thermoplastic. It is a heat-resistant and hardened plastic and makes up a lightweight tool.

And a lightweight product is easier to carry around and set-up. Another good thing about this material is the fact that it is cheap and doesn’t get rusted easily.

Another option that you can go for is the stainless steel machine. It is obviously, heavier than the thermoplastic one. Another point is that steel, sooner or later, is prone to rust.

Nevertheless, if you are looking for something that is lightweight and has a long life as well, then go for Cast Iron housing.

It is lighter than stainless steel but is heavier than Thermoplastic. However, there is just one problem, it can rust. But, there is a solution for this problem; simply apply an epoxy coating, and you have a rust-free sump pump.

You can choose any pump out of these three, but whichever you end up choosing, it will create a direct impact on the price.

2. Choose the right type of pump

Now, when you go researching for a sump pump, you will realize there are different kinds of pumps available in the market. There are these submersible pumps that work perfectly when submerged in the water and are actually easy to operate.

Then there is this other type of pumps, pedestal sump pumps, they are portable and doesn’t require as much maintenance in comparison.

The important on these machines are on the top of them, making them comparatively easier to carry around. And in the list of the machines given below, most of them are portable.

Then there is another kind of pump that comes with a backup system, aptly named backup sump pumps.

These pumps prove to be handy when there is no electricity and in case of heavy rains, electricity is usually absent from the picture. They come with a battery support system and can run for hours and discharge water out of the house.

There is a water powered pumps as well and they work as a straw does. However, they get clogged up very often and require maintenance frequently.

Each of these machines mentioned above has their advantages and drawbacks, do a quick cost-benefit analysis and go for it.

3. Pick a pump with the ideal switch

The ideal switch is the one that directly affects the longevity of the pump and three types of switches usually come with these pumps.

One of them is the tethered switch and this is the switch that lasts longer than the other two. But this switch needs a deeper pit than the other switches.

The other type of switch is Vertical switch pumps. They fit easily in the narrow sump pits, but their lifespan is shorter than the tethered switches.

The last type of switch is the electric switch and its parts don’t move as they do for the other two. However, they get affected by the water, you will have to clean them time and again to avoid any problem.

4. Get a measure of the motor

In other words, see the horsepower rating, the more the merrier. Since you need to discharge water and flush it out of the system this needs a large amount of power, so if the horsepower is more that means water will be flushed out faster.

Remember, before checking the horsepower, see how deep the water in your basement can actually get and then buy the pump accordingly.

5. The Quietest Pump you can find

When you have gotten used to having a sump pump in the basement, it is pretty easy to forget how loud they can get. Most of the pumps are quiet, look for those.

I have already written how to quiet a sump pump in case you already own a noisy sump pump, do give it a read.

Superior Pumps or pumps by Wayne are the quietest, it makes sense if you buy them.


Quietest Sump Pumps in 2019

Now that you know what to look for in a sump pump, allow me to introduce some of the best ones to you.

Image
WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
Zoeller 53-0016 115-Volt 0.3 Horse Power Model M53 Mighty-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump
Best Choice
Superior Pump 91250 Utility Pump, 1/4 HP, Black
Wayne VIP50 1/2 HP Thermoplastic Portable Electric Water Removal Pump
Wayne WSS30VN Upgraded Combination 1/2 HP and 12-Volt Battery Back Up System
Name
WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
Zoeller 53-0016 115-Volt 0.3 Horse Power Model M53 Mighty-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump
Superior Pump 91250 Utility Pump, 1/4 HP, Black
Wayne VIP50 1/2 HP Thermoplastic Portable Electric Water Removal Pump
Wayne WSS30VN Upgraded Combination 1/2 HP and 12-Volt Battery Back Up System
Price
$142.49
$197.28
$46.88
$77.24
$399.99
Ratings
Reviews
579 Reviews
14 Reviews
5,011 Reviews
669 Reviews
585 Reviews
Image
WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
Name
WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch
Price
$142.49
Ratings
Reviews
579 Reviews
Check Out
Image
Zoeller 53-0016 115-Volt 0.3 Horse Power Model M53 Mighty-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump
Name
Zoeller 53-0016 115-Volt 0.3 Horse Power Model M53 Mighty-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump
Price
$197.28
Ratings
Reviews
14 Reviews
Check Out
Best Choice
Image
Superior Pump 91250 Utility Pump, 1/4 HP, Black
Name
Superior Pump 91250 Utility Pump, 1/4 HP, Black
Price
$46.88
Ratings
Reviews
5,011 Reviews
Check Out
Image
Wayne VIP50 1/2 HP Thermoplastic Portable Electric Water Removal Pump
Name
Wayne VIP50 1/2 HP Thermoplastic Portable Electric Water Removal Pump
Price
$77.24
Ratings
Reviews
669 Reviews
Check Out
Image
Wayne WSS30VN Upgraded Combination 1/2 HP and 12-Volt Battery Back Up System
Name
Wayne WSS30VN Upgraded Combination 1/2 HP and 12-Volt Battery Back Up System
Price
$399.99
Ratings
Reviews
585 Reviews
Check Out

1. WAYNE CDU980E ¾ HP Submersible Cast Iron and Stainless Steel Sump Pump

If your priority is sturdiness, then this one is the best deal you will get. The compact sturdy design is its USP. It is constructed using a cast iron and it is then covered by a stainless covering, an ingenious move on the part of makers.

Cast iron gives it the much-needed stability and the stainless steel saves it against rust. However, don’t let the cast iron make you think that it will add extra weight to the machine because the impeller is very light in the weight. Its polypropylene is light too.

This pump has the ability to protect itself from abrasion. It is the best submersible pump in the market. It can filter and disperse debris at a constant rate at that. That means it doesn’t need your constant attention.

The design of its suction is the best out there and there is no chance of air blocking the pathways.

Its motor is very powerful, a ¾ horsepower motor, it can 4600 gallons of water in an hour. Water can’t get inside the motor, it is heavily sealed and compartmentalized for added safety. It comes with a waterproof cable.

You can just quickly call any plumber there is and they will install it within 15 minutes. It is advised that you use it with 11 inch+ sump basins and yes, there is no use of weep holes with Wayne.

Pros

Pros
  • Silent switch
  • Automatic
  • Abrasion-resistant glass
  • Submersible
  • Filters debris
  • Almost doesn’t clog

Cons

Cons
  • Can clog


2. Zoeller M53 Mighty-mate Submersible Sump Pump

It is a big submersible pump which is green in color, but hey you need them to function properly, whatever be the color.

You are looking for a product that can keep your basement water-free at all times and Zoeller M53 Mighty-mate Submersible Sump Pump wouldn’t dissatisfy you.

Its installation is as easier than the Wayne pump, you don’t need to call a plumber, you can do it yourself. The horsepower rating of the machine is 1/3. It rotates at the speed of 1550 rotations per minute which is enough to keep your house dry.

The speed of its flushing will surprise you, the speed is tremendous, but its performance can change according to the location of installation.

Its bottom is made up of Thermoplastic which prevents heat conduction. Plus, plastic is water-resistant and does not rusts.

The switch that it has is vertical and automatic, expect no less from Zoeller. It runs perfectly for about 4 years without giving you any problems.

Its power cord is about 9 feet long, which is quite generous. Don’t worry though, it is coated with powder and is waterproof.

Once in a while, it can get clogged up, to avoid that though, a nail is placed there. Its impeller check valve works perfectly, smoothly. Dust and damp are prevented from entering in it, thanks to this perfection.

Every once in a while, you need to send it for maintenance, simply unscrew the bottom of the pump and clean the check valve.

Pros

Pros
  • Waterproof cables
  • 9 feet long cables
  • Thermoplastic material
  • Automatic switch

Cons

Cons
  • Can get clogged
  • Frequent maintenance


3. Superior Pump 91250 ¼ HP Thermoplastic Submersible Utility Pump with 10-Foot Cord

PreviewProductRatingPrice
Superior Pump 91250 Utility Pump, 1/4 HP, Black Superior Pump 91250 Utility Pump, 1/4 HP, Black 5,011 Reviews $46.88

And here is the quietest sump pump you will find that fits right into your budget. And in a limited budget, you can use this to empty water not only from the basement but also from the swimming pool.

You will like its construction too. It is made up of the durable thermoplastic and prevents the machine from overheating. It also proves to be advantageous when you four years later you see no sign of rust and corrosion.

Its opening is small, 6-inch but it’s fitting is nice due to its size. It can take water from the bottom and from the sides as well. Another reason for its enhanced performance, another thing adding to its performance is the fact that it pumps water continuously. It has an in-built clog-resistant suction mechanism too.

It wouldn’t satisfy you with motor too, it has ¼ HP, enough to lift water up to 25 feet, vertically. The motors have split capacitors which provide good winding power. In spite of its size, it can hold itself when the times get tough.

It can pump 30 gallons of water per minute and if you attach a 1-1/4th-inch garden hose too, then you can pump 1800 gallons of water in an hour. Rest assured, its 1/4th-inch iron pipe is not going to let your basement flood anytime soon.

The pump has a suction that filters debris out and it is easy to clean it too if you want. That’s it though, your maintenance ends here.

The switch that it has is removable, if you want, then it can function without a switch too. It’s not automatic though; you will have to manually close it when you are done. Nevertheless, you can also it as a tank-less water heater too.

Pros

Pros
  • Empties swimming pool too
  • Can be used as a tank-less water heater
  • Removable switch; can function without it
  • No heavy maintenance required
  • Waterproof cord
  • 10-feet power cord
  • UL and CUL listed, CSA certified

Cons

Cons
  • Not automatic


4. Wayne VIP50 ½ HP Thermoplastic Portable Electric Water Removal Pump

We are talking about electric sump pumps, so now would be a good time to talk about Wayne VIP50. This portable, lightweight and easy to operate pump comes with a garden hose adapter.

Why? To facilitate those small jobs other than cleaning basement dry. Did someone say versatile?

It is cased in a thermoplastic coat, protecting it from overheating. And we do know that thermoplastic material is corrosion-free, right? And the air machine comes sealed, that means you don’t have to worry about any debris getting in.

It is an electric sump pump, but it is manual too, you will have to turn the switch on and off yourself. It comes with ½ motor, capable of removing 2500 gallons of water every hour.

From the 10-feet discharge life, it can pump out 1550 gallons of water out, and at the 5-feet discharge lift, it pumps out 2000 gallons of water. You can’t set it below 15-feet and at this point, it can pump out 900 gallons of water per hour.

It has a 1-1/4 inch discharge outlet, due to which water gets out rather quickly. It comes with an extension elbow that helps you to drain water from boats, garden, lawn or anywhere else. The only thing it needs is a 2-5/8 inch of water to start working its magic.

Pros

Pros
  • Corrosion free
  • Drain water from garden, boats, etc
  • Electric

Cons

Cons
  • Manual on and off
  • Requires maintenance regularly


5. Wayne WSS30V Upgraded Combination ½ HP and 12-Volt Battery Back-Up System

This upgraded version has a body made up of Steel body and has a cast iron base. This double body system makes the machine heavier but its durability increases too. It comes with no airlock system.

Its assembly has never been a problem before, in fact, it almost comes fully assembled. All you have to do is choose an appropriate location, make the connections, and switch it on.

Appropriate location as in, you will need a 15-inch basin to make sure this machine works properly. This set up will require only 15 minutes from a plumber.

It has a float switch and as the water level rises above a certain level, it starts automatically. The switch works perfectly for about 1 million cycles.

When this machine is set up at the 0 feet above the ground level, it can drain 4380 gallons of water in an hour. It has a long life of about 5 years.

From the depth of 5 feet, it can drain 4380 gallons of water in an hour and this figure becomes 3480 gallons per hour when it is at a depth of 10 feet.

Its battery works perfectly on a 12 V DC connection and pairing it with AC connection will give you a gem you didn’t know you were looking for.

However, it doesn’t come with a battery, but you can use it with any deep cell battery which is easily available.

So, how would you know that the battery is discharged and needs charging? It comes with a monitoring system. The red, green and yellow light monitoring system, so if the red light is blinking that means you need to recharge it.

Pros

Pros
  • Comes assembled
  • Has a steel body and cast iron base
  • Automatic

Cons

Cons
  • Heavier as compared to others
  • No airlocks
  • Requires a 15-inch basin
  • Has a float switch


So after reading this, you have the idea which quietest sump pump is perfect for you if you’ve any questions, feel free to ask in the comments section below.

Leave a Comment